Automatic Rebar Straightening And Cutting Machine
Products Description
Automatic Rebar Straightening And Cutting Machine
Automatic Rebar Straightening and Cutting Machine adopt rotating straightener and high-speed flying cutting mode, widely used for straightening and cutting smooth and ribbed, hot and cold rolled structural wires
Technical Advantages
1.Pulling speed is adjustable(two speed or limitless adjustable, depend on the model), Max. Pulling speed 150m/min.
2.The wire length to be cut is manually set and measured using a release device in the extension.
3.High-speed flying shearcutting system. In the cutting mode, the advance wheels are relieved from pressure.
4.Operating console with programmer, display and piece counter. After run-down of the pre-programmed rod.
5.Piece numbers, the machine is automatically brought to a standstill.
Products Description
|
Model
|
T 5/12
|
|
Rebar diameter
|
Φ5-Φ12 mm
|
|
Cut-off Length
|
800mm-12000mm
Could customized according to client's requirements
|
|
Pulling speed
|
~ 150m/min
|
|
Length adjust mode
|
Manual/Automatic
|
|
Cut mode
|
Servo shear
|
|
Control mode
|
PCC
(Programmable Computer Controller)
|
|
Speed Control
|
Steplessly Adjustable
|
|
Tensile strength of material
|
σb =210~650 Mpa
|
|
Length accuracy
|
±2 mm
|
|
Load capacity of Pay-off
|
3 t
|
|
Dimension
|
2.6(L) x 1.0(W) x 1.98(H)m
|
|
Gross weight
|
~3t
|
Delivery
Hot Tags: automatic rebar straightening and cutting machine, China automatic rebar straightening and cutting machine manufacturers, suppliers, factory, Vertical Wire Drawing Machine, ,
You Might Also Like
Send Inquiry