Wire Drawing Machine
Hebei Hylite Machinery Co., Ltd. is located in the center of the Beijing-Tianjin-Hebei economic & technological region - Xianxian Economic Development Zone, The factory covers an area of 50 acres. We are engaged in the R&D, manufacturing and sale service of equipment for steel bar and metallic wire processing.
- ISO9001 /CE Certified
- Customized Solutions
- High-efficiency ,improves quality
- Factory Direct Sales, Low cost
- On-site Commissioning by Engineers
Our address
Xianxian Economic DevelopmentZone, Cangzhou City, HebeiProvince
Phone Number
008615130775601
cnhylite001@hylitemachinery.com
Types of Wire Drawing Machine
Inverted wire drawing machine
Inverted wire drawing machine
Principle of the inverted wire drawing machine: The motor drives the drum placed on the output shaft of the reduction box to rotate through the pulley and reduction gear, and pulls the wire to complete the wire drawing. The reel is placed upside down at the bottom of the reduction box, and the drawn wire passes through the lead roller. The drawn wire can be directly collected to the drop frame. The drop frame rotates synchronously with the reel to achieve large-scale rewinding.
Water tank type wire drawing machine
Water tank type wire drawing machine
The water tank-type machine utilizes water cooling mechanisms to prevent overheating during the wire drawing process. This ensures that the wires maintain their integrity and quality throughout the production process. By controlling the temperature effectively with an inverter, this type of machine minimizes any potential damage or deformities caused by excessive heat. The water tank feature makes it especially suitable for working with heat-sensitive materials or when producing wires with specific temperature requirements. The tension in the wires is regulated to ensure a consistent output.
Straight Line Wire Drawing Machine
Straight Line Wire Drawing Machine
Principle of the straight type wire drawing machine: adopt multi-pass continuous cold drawing with independently driven capstans and constant tension synchronous control.Wire passes through drawing dies in a straight line without slipping and twisting, reducing diameter step by step at high speed with low tension.
Horizontal wire drawing machine
Horizontal wire drawing machine
Principle of the horizontal wire drawing machine adopts horizontal arranged multi-pass drawing dies and horizontal single/dual capstan structure. Relying on continuous cold drawing traction, the wire rod passes through drawing dies in horizontal straight direction, realizing gradual diameter reduction, surface smoothing and wire forming under the action of pulling force.
Straight Line Wire Drawing Machine :
| Raw material | Low carbon steel wire, high carbon steel wire, stainless steel wire, galvanized wire, copper wire, aluminum alloy wire |
| Input wire diameter | Φ2.0mm ~ Φ8.0mm |
| Finished wire diameter | Φ0.8mm ~ Φ3.5mm |
| Drawing Passes | 6 / 8 / 10 / 12 / 14 / 16 |
| Max speed | 20 m/s |
| Driving type | Independent AC servo motor / Variable frequency motor |
| Single motor power | 15kW ~ 55kW |
| Total installed power | 90kW ~ 400kW |
| Control system | PLC + Touch screen + Tension closed-loop control |
| Capstan material | High-quality cast iron / Alloy steel with hard chrome plating |
| Capstan diameter | Φ400mm / Φ450mm / Φ500mm / Φ560mm/Φ600/Φ750/Φ800 |
| Die material | Tungsten carbide / Natural diamond / Synthetic diamond |
| Drawing type | Non-slip, non-torsion straight line drawing |
| Suitable wire tensile strength | ≤ 1800MPa |
Water tank type wire drawing machine:
| Applicable material | Low carbon steel wire, high carbon steel wire, stainless steel wire, galvanized wire, copper wire, brass wire, welding wire |
| Input wire diameter | Φ0.6～Φ3.0 mm |
| Finished wire diameter | Φ0.1～Φ1.2 mm |
| Drawing Passes | 18 / 22 / 24 / 26 / 30 passes |
| Speed | Normal speed：3～12 m/s Max linear speed：15 m/s |
| Capstan diameter | Φ260 / Φ300 / Φ350 mm |
| Capstan surface | Hard chrome plated, anti-corrosion & wear-resistant |
| Main motor power | 18.5kW～75kW |
| Control | PLC + touch screen, stable speed regulation |
| Features | Suitable for fine wire & ultra-fine wire drawing,Simple structure, low noise, low maintenance cost |
Inverted wire drawing machine :
| Suitable for | Low carbon steel wire, high carbon steel wire, galvanized iron wire, welding wire, steel strand raw wire |
| Working feature | Vertical inverted structure, drawing & take-up integrated |
| Inlet diameter | 6.5-14mm |
| Outlet diameter | 4.5-14mm |
| Max linear speed | 7.5 m/s |
| Structural Features | Special designed for big diameter thick steel wire drawing process |
Precautions of Wire Drawing Machine
⑴. Operators must wear gloves to prevent the workpiece from burning their fingers and affecting product quality.
(2). Before starting the machine, carefully check the air supply of the wire drawing machine, whether there is air leakage in the air supply pipeline, and drain the accumulated water in the air filter.
⑶. Correctly install the drawing abrasive belt (the direction of the arrow on the inner side of the drawing abrasive belt should be consistent with the direction of the arrow on the drawing roller). Carefully check whether the upper and lower bearing seats and the lifting screw are well lubricated, and make sure that there is no one in front of the discharge material before starting the wire drawing machine.
⑷. Immediately after the equipment is started, check whether the swing of the abrasive belt is within the required range and whether there are other abnormal phenomena, otherwise, it should be adjusted or shut down immediately.
⑸. It is strictly forbidden to start the wire drawing machine and the dust collection fan at the same time, and it is strictly forbidden for the operator to leave the work post after starting up.
⑹. It is strictly forbidden to place the workpiece directly on the conveyor belt for wire drawing without a pallet, and it is strictly forbidden to place the workpiece directly on the wooden pallet for wire drawing without a baffle, so as to avoid damage to the conveyor belt and the workpiece flying out and hurting people.
⑺. When two people are working, the operator behind the equipment must not face the exit of the wire drawing machine, so as to prevent the workpiece from flying out and hurting people.
⑻. The pressure adjustment of the wire drawing machine should be moderate. In general, the pressure gauge indication should be between 35 and 75. It is strictly forbidden to exceed the red line to avoid equipment or personal accidents.
⑼. It is strictly forbidden to adjust the air pressure when the wire drawing machine is in normal operation, so as to avoid equipment and personal accidents caused by the loss of control of the abrasive belt.
⑽. If there is an abnormal phenomenon during the operation of the wire drawing machine, it should be shut down immediately and the power should be cut off to avoid the expansion of the fault.
⑾. When the equipment is overhauled, the main power supply should be turned off, and a sign is strictly prohibited to operate, so as to avoid accidents.
⑿. Turn off the main power supply and compressed air when you are off work or when the equipment is on standby for a long time to ensure safety of the equipment.
Certifications
Our Factory
The enterprise was formerly known as cangzhou boyuan wire drawing machinery co., ltd., which was established in 2009. The new enterprise hebei hylite machinery co., ltd. Was founded in 2019 due to the development of the company and the expansion of production scale while the original production site can no longer meet production needs. It is now known as a large wire drawing machines manufacturer in northern china.
Video Frequency