1. Maintenance is also the focus of use. Good maintenance can keep the machine in good accuracy and operating condition for a long time. Therefore, we should perform relevant maintenance on the machine regularly.
2. After each processing of a certain number of steel bars, the length should be measured to see if it is correct. If there is any deviation, make appropriate adjustments. The current wire drawing machine adopts digital control, and the cutting length can be said to have zero error.
3. Straightening is done by straightening the steel bars through the upper and lower rows of pressing wheels. If the straightening effect of the steel bars is not achieved, you can adjust the upper adjustment wheel to appropriately adjust the offset of the pressing wheels until the straightening effect is achieved. The steel bars can achieve satisfactory results.
4. Do not place debris or materials on the cutting machine to prevent vibrations generated during the operation of the machine from causing objects to fall into the machine. After feeding the steel bars into the press roller, you should immediately release your hands and keep a certain distance from the machine. Do not wear gloves during operation to avoid accidents.
