Why Does The Wire Drawing Machine Host Fail To Start And Disconnect Frequently?

When users operate wire drawing machine equipment, they often encounter some troubles. Common problems include the device's host being unable to start and frequent wire breaks. So, after encountering such a problem, how can we quickly solve it so that the wire drawing machine equipment can return to normal working condition? Let's take a look at the specific content, I hope it helps.
First, let's analyze why the wire drawing machine equipment cannot start. In fact, there are many factors for this situation. The first reason is that the control power switch of the device is not turned to the ON state. At this time, we should turn the control power switch to the ON state. The second reason may be due to the last production During the process, the problem of disconnection and shutdown occurred, or it was caused by failure to reset in time after shutdown. Then a reset at this time can solve the problem.
The third reason may be that the emergency stop button of the wire drawing machine equipment is not turned off. At this time, the button should be turned off. The fourth reason is that the inverter cannot be started due to tripping. At this time, you can refer to the information displayed on the inverter display panel to operate, then turn off the main power supply, wait 30 seconds and then restart it.
Another troublesome problem is the frequent disconnection of wire drawing machine equipment during operation. This will cause us a lot of waste, so we must solve this problem in time. There are many reasons why such a problem occurs. For example, it may be due to improper configuration of the eye model used, and the eye model should be reconfigured.
In addition, it may also be due to the wire drawing machine running too fast, causing the wire to break; or there is a problem with the quality of the wire itself, and the wire should be replaced; or the lubricant used has deteriorated and should be replaced. Replace with new ones etc.